保证蒸呢机在焊接时的保障措施,主要有五个方面。保证了这五个方面,那么高效蒸呢机的质量也能得到保障了。首先就是人, 人的因素是施焊的控制重点。因此,在施焊前,应选择技术熟练、持有焊工证的焊工,进行必要的技术培训、交底。并不得随意更换,保证施焊该管道焊工人员相对稳定。
There are five main safeguard measures for guaranteed square pipe during welding. The quality of galvanized square tubes can also be guaranteed if these five aspects are guaranteed. First of all, the human factor is the key point of welding control. Therefore, before welding, we should select skilled welders with welding license, and carry out necessary technical training and submission. It should not be replaced at will to ensure the relative stability of welders.
其二是焊材的控制,保证采购的是正规渠道的焊材,有质保书、合格证,符合工艺要求;焊条头回收控制严格,以保证流向、用量;焊材要严格按工艺烘烤,并一次发放不超过半天用量。
The second is the control of welding materials, to ensure that the purchase of regular channels of welding materials, quality assurance, certification, in line with the requirements of the process; tightly control the recovery of electrode head to ensure flow direction, dosage; welding materials should be strictly baked in accordance with the process, and once issued not more than half a day of dosage.
第三就是 焊机,焊机须保证性能可靠、符合工艺需要;焊机必须有检定合格的电流、电压表,以保证焊接工艺的正确实施。焊接电缆不能过长,较长时要调整焊接参数。
The third is the welding machine, which must ensure reliable performance and meet the needs of the process; the welding machine must have qualified current and voltage meters to ensure the correct implementation of the welding process. Welding cable should not be too long. Welding parameters should be adjusted for a long time.
第四是焊接工艺方法,保证镀锌管特殊操作方法的严格实施,焊接工艺进行焊前坡口检查,施焊工艺参数、操作手法控制,焊后外观质量检查,必要时增加焊后无损检测。控制焊接层次、每道口的焊材用量。
Fourthly, the welding process is to ensure the strict implementation of special operation methods for galvanized pipes. The groove inspection before welding, the control of welding process parameters and operation methods, the appearance quality inspection after welding, and the non-destructive inspection after welding should be added when necessary. Control welding level and welding material consumption per pass.
第五就是焊接环境控制,保证施焊时的温度、湿度、风速符合工艺要求。
Fifth, the control of welding environment to ensure that the temperature, humidity and wind speed meet the requirements of welding process.
蒸呢机市场价格稳中有跌出货有所转弱蒸呢机蒸呢机市场价格稳中有跌。主导市场,北京、天津、上海和广州均出现下跌。期螺夜盘震荡向上,但并未翻红,早盘倒是翻红了,但收盘前一波 跳水又给砸绿了,当前市场氛围本就偏弱,如此一来市场情绪再次受到压制,消息面也没有足够的利好支撑,所以市场价格继续稳中有跌。午后期螺主力合约成功换至05,盘面走势偏弱,市场表现依… 武汉蒸呢机市场价格小幅下调厂家心态谨慎悲…蒸呢机武汉蒸呢机市场价格小幅下调,市场成交偏弱。今日期货走势延续弱势下跌的局面,早盘报价小幅下调,午后蒸呢机厂家出货受限,市场价格难以持稳。成交方面,普板出货偏弱,而低合金出货相对较好,市场 存在部分低价资源,下游接受度较高,但总体出货情况较为一般。据市场反馈,本周市场到货相对集中,大户库存积累相对明显,个…
管理员
该内容暂无评论